AIRTRONICS M12 Uživatelská příručka stáhnout pdf (Strana 25)



Choosing a Car Type, Continued:

2) Press the ENTER key to open the TYPE menu. The cursor will default to CAR

TYPE > I.

3) Press the ENTER key, then scroll UP or DOWN to Select the desired Car Type

as shown in the table below. The TYPE Menu Programming Display shows

the Car Type (Normal or Crawler) and which servos should be plugged into

what receiver channel slots. For example, CAR TYPE > VII is a Normal Car Type

that might be used for a 1:5 scale off-road gas buggy that uses two Steering

servos and a separate second Brake servo. In this example, the Left Steering

servo should be plugged into channel 1, the Right Steering servo should be

plugged into channel 3, the Throttle/first Brake servo should be plugged into

channel 2 and the second Brake servo should be plugged into channel 4.

4) Press the ENTER key. MODEL DATA CLEAR? NO/YES will be displayed.

5) Scroll UP or DOWN to highlight YES, then press the ENTER key. EXECUTING

will be displayed and the current Model Programming Data will be reset with

the Selected Car Type options.

If you want to go back and change the Car Type or you don't want to create

the new Car Type for any reason, choose NO or press the BACK key prior

to EXECUTING.

Your particular Model may not require the use of all four channels, even though each Car Type template may show them.

In this case, those channels will simply go unused.

CH 1

CH 2

CH 3

CH 4

TYP I

TH+BR

AUX1

AUX2

TYPE

TYP II TYP III TYP IV TYP V TYP VI TYP VII TYP VIII TYP IX TYP X

AUX

TH+BR

BR2

AUX

BR2

L-ST

TH+BR

R-ST

AUX

L-ST

R-ST

L-ST

TH+BR

R-ST

BR2

F/ST

TH+BR

R/ST

AUX

F/TH+BR

R/TH+BR

AUX

F/ST

F/TH+BR

R/ST

R/TH+BR

ST=Steering • TH=Throttle • BR=Brake • BR2=Brake 2 • R-ST=Right • L-ST=Left • R/ST or R/TH=Rear • F/ST or F/TH=Front

The MODEL menu allows you to Select different Models, Name your saved Models, Copy Programming Data from one Model

to another Model, Clear Programming Data from one or more Models and Sort your saved Models into a Custom list, using the

Model Select, Model Name, Model Copy, Model Clear and Model Sort functions. This allows you to use the transmitter with

different Models and quickly and easily Select the Programming Data for each of them. Programming Data for up to 50 different

Models can be stored in the transmitter's memory.

The Model Select function allows you to load the Programming Data for the particular Model you wish to drive. The MODEL

SELECT menu displays the currently Selected Model, along with a list of available Models that can be Selected. The current

Modulation Type and Car Type of each Model is also displayed. The transmitter can store Programming Data for up to 50

different Models.























Selecting a Model:

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the MODEL

menu.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 115 116

Komentáře k této Příručce

Žádné komentáře

AIRTRONICS M12 Uživatelská příručka Strana 25

Komentáře k této Příručce

Související produkty a manuály pro Dálková ovládání AIRTRONICS M12