AIRTRONICS M12 Uživatelská příručka stáhnout pdf (Strana 79)













Choosing the Channel and the Curve Type:

1) From within the RACING menu, scroll UP or DOWN to highlight the CURVE

menu.

2) Press the ENTER key to open the CURVE menu. The < ST > channel will be

Selected.

3) Press the SELECT switch RIGHT or LEFT to choose the desired channel you

would like to program Exponential for.

4) From within the CURVE menu, scroll UP or DOWN to highlight the TYPE > value.

5) Press the ENTER key and scroll UP or DOWN to choose TYPE > EXP.

Changing the Rate Percentage Value:

The Rate percentage value determines the amount and type of Exponential, either Quick, Mild or Linear (see diagram on the

previous page). When a Positive or Negative Exponential percentage value is programmed, a Curve will be created from a fixed

Neutral Point. This Curve will be equal on both sides, except for the Throttle channel. For more information, see the notation below.

1) From within the CURVE menu, scroll UP or DOWN to highlight RATE > 0%.

2) Press the ENTER key, then scroll UP or DOWN to Increase or Decrease the

Rate percentage value. Using a Negative Rate percentage value will Soften

the control feel around Neutral and using a Positive Rate percentage value

will Heighten the control feel around Neutral.

RATE setting range is -100% (Mild) to 100% (Quick). The default setting is 0% (Linear).

You are able to adjust the Rate percentage value for the Throttle High Side

and the Throttle Brake Side separately. In addition, you can even program

Exponential for one Side and ARC or Point Curve for the other Side.

Changing the Steering Tweak Right and Tweak Left Values:

The Tweak function allows you to make small Exponential adjustments to the Right and/or Left sides of the Steering channel Neutral

Point to fine-tune the balance between the two sides. Tweak value adjustments are effective whether you program a Negative or

a Positive Rate value, or even program a Linear Rate value (0).

1) From within the CURVE menu, scroll UP or DOWN to highlight the desired

Tweak value, either T

WEAK L or TWEAK R.

2) Press the ENTER key, then scroll UP or DOWN to Increase or Decrease the

Tweak value. Using a Negative Tweak value will Soften the control feel that

side of Neutral and using a Positive Rate percentage value will Heighten the

control feel around that side of Neutral.

3) Press the ENTER key, then repeat steps 1 and 2 to change the other Tweak value, if desired.

TWEAK L and TWEAK R setting range is -20 (Mild) to 20 (Quick). The default setting for both Tweak values is 0 (Linear).

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 115 116

Žádné komentáře

AIRTRONICS M12 Uživatelská příručka Strana 79