AIRTRONICS M12 Uživatelská příručka stáhnout pdf (Strana 96)



 

Overview:

The RX-461 and RX-462 receivers each feature two Temperature Sensor Inputs and one RPM Sensor Input, in addition to the

Voltage Sensor built into the receiver. Temperature and RPM Sensors can be installed into your Model to give you Temperature

and RPM or Speed feedback in real-time displayed on the transmitter's TELEMETRY screen.

The range of the Telemetry System is approximately 260 feet (80 meters), although the range can vary based on many

environmental factors. Use the Telemetry Signal Indicator to determine the quality of the Telemetry Signal.

When used with an Airtronics 2.4GHz FH4T Telemetry-capable surface receiver, such as the RX-461 or RX-462, and up to two

Temperature Sensors and an RPM Sensor (all available separately), Telemetry Data, such as RPM or Speed, Temperature, and

Receiver Voltage can be viewed on the M12 transmitter's TELEMETRY screen.

This section details connecting the RPM and Temperature Sensors to the RX-461 and/or RX-462 receiver and how to mount those

Sensors into your Model. For more information about the specifics of either receiver, refer to the User's Guide included with your

receiver.

For more information about viewing Telemetry Data on the TELEMETRY screen, see the

TELEMETRY Screen Overview

section

on pages 22 ~ 23. For more information about choosing Telemetry options, see the

LOG SETUP Menu

section on pages 48 ~ 56.

Plugging the Telemetry Sensors into the Receiver:

1) Carefully pry up and remove the plastic cover from over the Telemetry Sensor Input Ports on the receiver.

2) Plug the Telemetry Sensor(s) into their respective Input Ports in the receiver. The Temperature Sensor can be plugged into

either the TEMP 1 or the TEMP 2 Input Port and the RPM Sensor is plugged into the RPM Input Port. The Sensor Plugs are

indexed so they can be plugged in only one way.

Make sure to push the Sensor Plugs firmly in place to ensure a good connection. When routing Sensor Wires inside your

Model, be careful that they cannot come into contact with any moving parts. The Sensor Wires should be securely mounted

and protected against damage. In addition, install the dust covers included with your receiver to prevent dirt and debris from

getting into any unused Input Ports.

1) Mount the RPM Sensor to an aluminum or ABS angled bracket, then mount the bracket to your Model, making sure that it's

held securely in place. For optimal operation, the Sensor Pickup should be positioned approximately 1mm away from the

rotating part (flywheel, spur gear, pinion gear etc.)

2) Cut one of the two reflective decals included with the RPM Sensor into an ~2mm diameter and apply it to the rotating part, so

that as the part rotates, the reflective decal passes in Front of the Sensor Pickup. If the rotating part is metallic-colored (silver,

aluminum, chrome, etc.), use the Black reflective decal and if the rotating part is dark-colored (black, blue or another dark

color), use the White reflective decal.

When installed, it's important that the Sensor Pickup face the rotating part and that the Black or White reflective decal is

positioned so that it passes in Front of the Sensor Pickup. It's also important that the reflective decal contrasts with the rotating

part it's applied to and that the Sensor Pickup is mounted approximately 1mm away from the rotating part.

After installing the RPM Sensor and connecting it to your receiver, the RPM Sensor must be calibrated. For more information,

see the

RPM and Speed Telemetry Data Display Options

section on pages 48 ~ 50.

Mounting the RPM Sensor:

The RPM Sensor uses infrared technology to record RPM data from a rotating part, such as a flywheel or a spur gear. One Black

and one White reflective decal is included that is attached to the rotating part so the Sensor Pickup can 'see' it.

Sensor Pickup

Input Plug

Reflective Decal

Angled Bracket

RPM Sensor

Sensor Pickup

Spur Gear or Other Rotating Part

~1mm

Sensor Pickup

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 115 116

Komentáře k této Příručce

Žádné komentáře

AIRTRONICS M12 Uživatelská příručka Strana 96

Komentáře k této Příručce

Související produkty a manuály pro Dálková ovládání AIRTRONICS M12