AIRTRONICS M12 Uživatelská příručka stáhnout pdf (Strana 72)



1) From within the SETUP menu, scroll UP or DOWN to highlight the LAP TIMER

menu.

2) Press the ENTER key to open the LAP TIMER menu. GOAL TIME > 60'00 will be

highlighted.

3) Press the ENTER key, then scroll UP or DOWN to choose the desired Goal

Time value in Minutes : Seconds.

GOAL TIME setting range is 10 Seconds to 60 Minutes (00'10 to 60'00) and is

adjustable in 10 second intervals. The default setting is 60 Minutes.

Setting the Pre-Alarm Time:

The Pre-Alarm function is used to alert you that your Goal Time is approaching. You can program the Pre-Alarm to sound once

every second the desired number of seconds prior to reaching your Goal Time. For example, if the Pre-Alarm value is set to

5 Seconds, a short audible Tone will sound every second, 5 seconds prior to reaching your Goal Time. If desired, the Pre-Alarm

value can be set to OFF to turn the Pre-Alarm OFF.

1) From within the LAP TIMER menu, scroll UP or DOWN to highlight PREALARM

> 5sec.

2) Press the ENTER key, then scroll UP or DOWN to choose the desired Pre-Alarm

value in Seconds.

PRE

ALARM setting range is OFF and 1 to 20 Seconds. The default setting is

5 Seconds.

Choosing the Optional Throttle Trigger Start:

The Throttle Trigger can be used to Start the Lap Timer after the Lap Timer as been placed in Standby. This is much more convenient

than worrying about pressing the Lap Timer Switch again to Start the Lap Timer when you're starting your race.

1) From within the LAP TIMER menu, scroll UP or DOWN to highlight

STARTTRIGGER > OFF.

2) Press the ENTER key, then scroll UP or DOWN to choose the desired Start

Trigger value, either ON of OFF.

START

TRIGGER setting range is OFF and ON. The default setting is OFF.

Setting the Goal Time:

When the Lap Timer is counting Up, a long audible Tone will sound when the Goal Time is reached. For example, if you set the

Goal Time value for 5 Minutes, a long audible Tone will sound when the Lap Timer reaches 5 minutes.

When the Goal Time is reached the Lap Timer will continue counting Up, but you will no longer be able to continue counting

Lap Times. The next time you press the Lap Timer Switch, the Lap Timer will Stop.











Starting the Lap Timer and Counting Lap Times:

1) In the default configuration, the Lap Timer Switch (Push-Button Switch Sw3) controls the Lap Timer. Press and HOLD the Lap

Timer Switch for 3 seconds. An audible Double-Tone will sound and LAP [STANDBY] will be displayed momentarily in a pop-up

window, indicating the Lap Timer is in Standby. To start the Lap Timer, press the Lap Timer Switch a second time or pull the Throttle

Trigger if you've Enabled the Start Trigger function. An audible Double-Tone will sound and the Lap Timer will start counting Up.

2) Press the Lap Timer Switch a second time to store the first Lap Time and begin counting a second Lap Time. Each time you

press the Lap Timer Switch, an audible Tone sounds, the previous Lap Time is stored, a new Lap Time begins and the current

Lap Time is displayed momentarily in a pop-up window.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 115 116

Komentáře k této Příručce

Žádné komentáře

AIRTRONICS M12 Uživatelská příručka Strana 72

Komentáře k této Příručce

Související produkty a manuály pro Dálková ovládání AIRTRONICS M12