AIRTRONICS M12 Uživatelská příručka stáhnout pdf (Strana 46)













Calibrating the Steering, Throttle and Auxiliary Lever Controls, Continued....

7) Slowly move the Steering Wheel( or Throttle Trigger or Auxiliary Lever) all the

way in one direction. Allow the control to return to Neutral, then slowly move

the Steering Wheel, Throttle Trigger or Auxiliary Lever all the way in the opposite

direction. A series of values and ADJUST OK? NO/YES will be displayed.

8) Scroll UP or DOWN to highlight YES, then press the ENTER key. After the calibration process completes, NEUT > 0 will be

highlighted.

If you want to go back and repeat the calibration process or if you don't want to finish the calibration process for any reason,

choose NO or press the BACK key.

9) Press the BACK key to return to the VR ADJUST menu and repeat steps 2 through 7 to calibrate the remaining controls.

Resetting the Steering, Throttle and Auxiliary Lever Calibration Values:

The calibration values can be reset to the Factory Default values quickly and easily should you require it.

2) Press the ENTER key. SETTING > USER will be highlighted.

3) Press the ENTER key, then scroll DOWN to choose the SETTING > FACTORY

option.

4) Press the ENTER key. The calibration values for that control will be reset to the

Factory Default values.

5) Press the BACK key to return to the VR ADJUST menu and repeat steps 1

through 5 to reset the desired remaining controls.











The BATT menu allows to specify the voltage at which the Low Voltage Alert and Low Voltage Limit alarms will sound. This allows

you to choose custom Low Voltage values to match the type of transmitter battery you're using. For example, if you're using a

2S Li-Po battery pack, you can set the Low Voltage Alert alarm and the Low Voltage Limit alarm voltage values to suit.

The tables below show the different Low Voltage Alert and Low Voltage Limit values we recommend using:

4.6 Volts

7.0 Volts

4 Cell Alkaline

6 Cell Ni-CD/Ni-MH

4.4 Volts

6.6 Volts

BATTERY TYPE

ALERT VALUE LIMIT VALUE

1) From within the VR ADJUST menu, scroll UP or DOWN to highlight the control

menu option you would like to reset the calibration values for, either ST (Steering),

TH (Throttle) or LEVER (Auxiliary Lever).

7.2 Volts

6.3 Volts

2S Li-Po

2S Li-Fe/A123

6.8 Volts

5.8 Volts

BATTERY TYPE

ALERT VALUE LIMIT VALUE

To ensure the safety of your transmitter battery, we suggest using the Low Voltage Alert and Low Voltage Limit values shown

in the tables above. We don't suggest using values Lower than recommended.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 115 116

Komentáře k této Příručce

Žádné komentáře

AIRTRONICS M12 Uživatelská příručka Strana 46

Komentáře k této Příručce

Související produkty a manuály pro Dálková ovládání AIRTRONICS M12