AIRTRONICS M12 Uživatelská příručka stáhnout pdf (Strana 28)













5) Press the ENTER key. MODEL COPY OK? NO/YES will be displayed. Scroll UP

or DOWN to highlight YES, then press the ENTER key.

All Model-specific Programming Data, including the Model Name will be

copied to the highlighted Model. If you want to go back and change Models

or you don't want to Copy the Programming Data for any reason, choose NO or

press the BACK key prior to EXECUTING.

6) EXECUTED will be displayed and the Model you just copied Programming

Data TO will be highlighted in brackets and the top of the Model Copy List.

Copying Model Programming Data, Continued....

3) Press the ENTER key to open the COPY menu. The currently Selected Model

will be displayed in brackets above the Model Copy List.

4) Scroll UP or DOWN within the Model Copy List to highlight the Model you

would like to copy the current Model's Programming Data TO.



The Model Clear function allows you to reset Model-specific Programming Data for the currently Selected Model back to the

Factory Default settings. Make sure that prior to using the Model Clear function, you first Select and load the desired Model you

want to clear the Programming Data for, using the Model Select function.

When the Model Clear function is EXECUTED, all custom Programming Data for the currently Selected Model will be lost

and reset to the Factory Default settings!

Clearing Model Programming Data:

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the MODEL

menu.

2) Press the ENTER key to open the MODEL menu, then scroll UP or DOWN to

highlight the CLEAR menu. The currently Selected Model will be displayed.

3) Press the ENTER key. MODEL CLEAR OK? NO/YES will be displayed. Scroll

UP or DOWN to highlight YES, then press the ENTER key. EXECUTED will be

displayed and all Programming Data for the currently Selected Model will be

reset to the Factory Default settings.

If you want to go back and change Models or you don't want to Clear the

Programming Data for any reason, choose NO or press the BACK key prior

to EXECUTING.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 115 116

Žádné komentáře

AIRTRONICS M12 Uživatelská příručka Strana 28