AIRTRONICS M12 Uživatelská příručka stáhnout pdf (Strana 67)



Choosing the Four Wheel Steering Mixing Options:

1) From within the SETUP menu, scroll UP or DOWN to highlight the 4WS MIX

menu.

Controlling the Motor on Axle Mixing Function:

1) In order to control the Motor on Axle function, the MOA MIX function must be Assigned to either one of the five Trim Switches,

the Auxiliary Dial or the Auxiliary Lever. For more information, see the

ASSIGN Menu

section on pages 33 ~ 38.

2) Use the Trim Switch, Auxiliary Dial or Auxiliary Lever to adjust the Power Distribution values to achieve the desired results - either

OFF, Dig or Burn, as described above. A pop-up window will display the current Power Distribution values.

PRO TIP: In the default configuration, switching between OFF, Dig and Burn will happen gradually as you move the Trim Switch

or Auxiliary Dial. This allows you to vary the Power Distribution between the Front and Rear motors. If you prefer to switch

between OFF, Dig and Burn as if they were Assigned to an ON/OFF switch, change the Trim Switch or Auxiliary Dial Step value

to 100. For more information, see the

ASSIGN Menu

section on pages 33 ~ 38.

Alternately, switching between OFF, Dig and Burn can be controlled using the Auxiliary Lever. This allows you to quickly switch

between OFF, Dig and Burn and still have the ability to variably change the Power Distribution between the Front and Rear

motors. To set this up, Assign MOA MIX to the Auxiliary Lever, then change the TWEAK (H) value to +100 and the TWEAK (L)

value to -100. For more information, see the

ASSIGN Menu

section on pages 33 ~ 38.











REAR Throttle (BURN) - When set to 0:100, power will only be distributed

to the Rear motor. Power can be distributed proportionally between the

Front and Rear motors from 0:100 to 99:100.

FRONT Throttle (DIG) - When set to 100:0, power will only be distributed

to the Front motor. Power can be distributed proportionally between the

Front and Rear motors from 100:0 to 100:99.

OFF (Balanced) - When set to 100:100 or other balanced value, power

will be evenly distributed between the Front and Rear motors.

Choosing the Motor on Axle Power Distribution Values, Continued....

The following Motor on Axle Mixing options can be programmed by changing the Power Distribution values:











The Four Wheel Steering Mixing function provides you with two Steering channels. It allows you to control either the Front or Rear

Steering independently or Mix the Front and Rear Steering to have Parallel Four Wheel Steering (Crab) or Tandem Four Wheel

Steering. Use one of the five Trim Switches or the Auxiliary Dial to cycle through the different Four Wheel Steering options while

you're driving. The Four Wheel Steering Mixing function can be toggled OFF and ON while you're driving by Assigning 4WS to

one of the three Push-Button Switches.

When using the Four Wheel Steering function, it's important to adjust the F/ST channel and R/ST channel Sub-Trim values

to center both Steering servos when the Steering Wheel is centered. This will ensure that your Model tracks straight. In

addition, remember, you are able to adjust many functions, such as Exponential, Servo Speed and much more for each Steering

channel independently. This allows for the optimum Four Wheel Steering Mixing setup.

The Four Wheel Steering Mixing function is available only when either Car Type VIII or Car Type X is Selected.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 115 116

Komentáře k této Příručce

Žádné komentáře

AIRTRONICS M12 Uživatelská příručka Strana 67

Komentáře k této Příručce

Související produkty a manuály pro Dálková ovládání AIRTRONICS M12