AIRTRONICS M12 Uživatelská příručka stáhnout pdf (Strana 54)













5) Turn your other transmitter ON, then navigate to that transmitter's BIND menu and highlight the [ENTER] option. For more

information, refer to your transmitter's User's Guide.

4) Press the ENTER key to open the BIND menu. The Bind screen will be displayed

and [ENTER] will be highlighted.

7) Press the ENTER key on your other transmitter. RECEIVE will flash fast on the

M12 transmitter.

8) Press the BACK key, first on the M12 transmitter, then on your other transmitter, to complete the Binding process. The Bind LED

on your other transmitter should illuminate solid and both LED1 and LED2 on the M12 transmitter should be extinguished.

9) Press the BACK key to return to the STATUS screen, then scroll UP or DOWN to open the TELEMETRY screen. You should now

be able to view the other transmitter's Steering and Throttle Output Data on the M12 TELEMETRY screen. In addition, if your other

transmitter supports Telemetry,you should be able to view that transmitter's Telemetry Data on the M12 TELEMETRY screen.

6) Press the ENTER key on the M12 transmitter to begin the Binding process.

SEARCH will flash slowly.

Enabling Receiver Mode, Continued....

3) Press the ENTER key to open the LOG SETUP menu, then scroll UP or DOWN

to highlight the RX

MODE menu.



The Steering Point and Throttle Point functions allow you to calibrate the M12 transmitter's TELEMETRY screen ALL page Steering

and Throttle Output Data Displays, so the Output Data displayed matches your paired transmitter's Steering Wheel and Throttle

Trigger movement.

If you don't use the Steering Point and Throttle Point functions to calibrate the Steering and Throttle Output Data Displays,

incorrect data will be displayed. These steps should be performed after placing the M12 in Receiver Mode and Binding it to

your other transmitter.

Calibrating the Steering Output Data Display:

1) With the transmitter turned OFF, press and HOLD the DISPLAY key to turn only

the Display ON.

2) From within the SYSTEM menu, scroll UP or DOWN to highlight the LOG SETUP

menu.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 115 116

Žádné komentáře

AIRTRONICS M12 Uživatelská příručka Strana 54