AIRTRONICS M12 Uživatelská příručka stáhnout pdf (Strana 41)



Changing the LCD Contrast, Continued....

2) Press the ENTER key to open the LCD menu. CONTRAST > 15 will be highlighted.











3) Press the ENTER key, then scroll UP or DOWN to choose the desired Contrast

value. Increasing the Contrast value will Increase the contrast of the LCD and

Decreasing the Contrast value will Decrease the contrast of the LCD.

CONTRAST setting range is 10 to 20. The default setting is 15.

Changing the LCD Backlight Brightness:

1) From within the LCD menu, scroll UP or DOWN to highlight BRIGHT > 4.

2) Press the ENTER key, then scroll UP or DOWN to choose the desired Brightness

value. Increasing the Brightness value increases the brightness of the LCD

Backlight and Decreasing the Brightness value decreases the brightness of

the LCD Backlight.

BRIGHT setting range is 1 to 5. The default setting is 4.

Changing the LCD Backlight Mode:

1) From within the LCD menu, scroll UP or DOWN to highlight MODE > KEY-ON.

2) Press the ENTER key, then scroll UP or DOWN to choose the desired LCD

Mode value. Choose from OFF, KEY-ON or ALWAYS. When set to OFF, the

LCD Backlight will be turned OFF. When set to KEY-ON, the LCD Backlight will

turn ON when a key-press is made. When set to ALWAYS, the LCD Backlight

will stay ON at all times

MODE setting range is OFF, KEY-ON and ALWAYS. The default setting is KEY-ON.

Changing the LCD Backlight On-Time:

1) From within the LCD menu, scroll UP or DOWN to highlight TIME > 10sec.

2) Press the ENTER key, then scroll UP or DOWN to choose the desired LCD

Time value. The Time value (in seconds) determines how long the LCD

Backlight will stay ON before turning OFF automatically. This helps save

battery power.

TIME setting range is 1 to 30 seconds. The default setting is 10 seconds.











The Auxiliary Type function allows you choose the Operating Mode for Auxiliary 1 and Auxiliary 2, making it possible to change the

way these two Auxiliary channels function.

This section details how to change the Operating Mode of the two Auxiliary channels. For details about programming and

using each of the Auxiliary functions, see the

POINT AUX 1 Menu

section on pages 64 ~ 65, the

POINT AUX 2 Menu

section on

pages 65 ~ 66 or the

CODEAX1 and CODEAX2 Menu

section on page 93.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 115 116

Komentáře k této Příručce

Žádné komentáře

AIRTRONICS M12 Uživatelská příručka Strana 41

Komentáře k této Příručce

Související produkty a manuály pro Dálková ovládání AIRTRONICS M12