AIRTRONICS M12 Uživatelská příručka stáhnout pdf (Strana 74)



Choosing the Optional Throttle Trigger Start, Continued....

1) From within the INT1 menu, scroll UP or DOWN to highlight START

TRIGGER >

OFF.

2) Press the ENTER key, then scroll UP or DOWN to choose the desired Start

Trigger value, either ON of OFF.

INT1 and INT2 START

TRIGGER setting range is OFF and ON. The default setting for both Interval Timers is OFF.











Starting the Interval Timers:

In the default configuration, the Lap Timer Switch (Push-Button Switch Sw3) controls both the Lap Timer and Interval Timer 1.

To control Interval Timer 2, it must first be Assigned to a Push-Button Switch. If desired, the Interval Timers can be Started and

Stopped independently by Assigning each one to a different Push-Button Switch or they can be Started and Stopped simultaneously

by Assigning both of them to the same Push-Button Switch. Regardless of what you decide, follow the step below to control the

Interval Timer(s).

1) Press and HOLD the Push-Button Switch you've Assigned the Interval Timer(s) to for 3 seconds. An audible Double-Tone will

sound and INT1 [STANDBY] or INT2 [STANDBY] will be displayed momentarily in a pop-up window, indicating the Interval

Timer is in Standby. To Start the Interval Timer, press the Push-Button Switch a second time or pull the Throttle Trigger if you've

Enabled the Start Trigger function. An audible Double-Tone will sound and the Interval Timer will start counting Up. Each time

the Interval Time elapses, an audible Double-Tone will sound and the Interval Timer will Reset and start counting Up again

from zero. If desired, you can manually Restart the Interval Timer from zero by pressing the Push-Button Switch while the

Interval Timer is running.

If the Interval Timer is Assigned to the same Push-Button Switch as the Lap Timer and the Lap Timer is Assigned to

Function 1, LAP will flash and Lap Time information will be displayed in a pop-up window, but the Interval Timer will run in

the background.

When both Interval Timers are Assigned to the same Push-Button Switch, only the Interval Timer Assigned to Function 1

will be displayed in the pop-up window when the Interval Timers Start and Stop, however, if the Interval Timers are set to

different values, each Interval Timer will be displayed in the pop-up window as the Interval Times are reached.

Stopping the Interval Timers:

1) To stop the Interval Timer(s), press and HOLD the Push-Button Switch you've Assigned the Interval Timer(s) for 3 seconds. An

audible Double-Tone will sound indicating the Interval Timer(s) is stopped.

When Stopped, the Interval Timer will read 00'01"00. This is normal. This value will be cleared when the Interval Timer is

placed in Standby again.

R-MODE

D/R

TRIM

CURVE

SPEED

ALB

PG. 75

PG. 76

PG. 77

PG. 78

PG. 82

PG. 84

PAGE #

MENU DESCRIPTION

Turn Racing Mode ON or OFF and Choose Racing Mode Options

Adjust Steering, Throttle and Brake Dual Rates

Adjust Servo Trim, Including Auxiliary Channel Trim

Adjust Channel Exponential, Adjustable Rate Control (ARC) and Curves

Adjust Servo Speed in the Forward and the Return to Neutral Directions

Turn Anti-Lock Braking ON or OFF and Choose Anti-Lock Braking Options

The following Programming Menus are available within the RACING menu:

To access the various RACING Programming Menus, turn the transmitter ON,

then press the SELECT switch to highlight the RACING menu. Press the ENTER

key to open the RACING menu.

Scroll UP or DOWN to highlight the desired Programming Menu, then press the

ENTER key to open that menu.

Depending on the Car Type chosen, some Function Programming Value

Names may differ from those shown in this section.

 

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 115 116

Komentáře k této Příručce

Žádné komentáře

AIRTRONICS M12 Uživatelská příručka Strana 74

Komentáře k této Příručce

Související produkty a manuály pro Dálková ovládání AIRTRONICS M12