AIRTRONICS M12 Uživatelská příručka stáhnout pdf (Strana 29)















The Model Sort function allows you to change how your Models are displayed in the Model Select List by allowing you to swap

the currently Selected Model with other Models. For example, you might want to Sort your Models so that your most frequently

used Models are at the top of the Model Select List, or you might want to Sort your Models by type, such as crawlers, on-road, etc.

Sorting Models:

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the MODEL

menu.

2) Press the ENTER key to open the MODEL menu, then scroll UP or DOWN to

highlight the SORT menu.

3) Press the ENTER key to open the SORT menu. The currently Selected Model

will be displayed in brackets above the Model Sort List and the first Model in

the Model Sort List will be highlighted.

4) Scroll UP or DOWN within the Model Sort List to highlight the Model you

would like to swap the currently Selected Model with and move to the top

of the Model Sort List. For example, the currently Selected Model is M01.

Highlight M02 to swap M01 with M02 and move it to the top of Model Sort List.

5) Press the ENTER key. MODEL SORT OK? NO/YES will be displayed. Scroll UP

or DOWN to highlight YES, then press the ENTER key.

If you want to go back and choose a different Model or you don't want to

Sort the Selected Model for any reason, choose NO or press the BACK key

prior to EXECUTING.

6) EXECUTED will be displayed and the Model you highlighted (i.e. M02) will

be swapped with the currently Selected Model and moved to the top of the

Model Sort List.

7) Repeat steps 4 through 6 to continue Sorting Models by swapping with the

currently Selected Model. To swap with a different Model, you must Select

that desired Model using the Model Select function first. For more information,

see the

Model Select

section on pages 25 ~ 26.











The DMS function allows you to choose up to three different Models that can be Selected when turning the transmitter ON. Simply

press a key while turning the transmitter ON and the Programming Data for your favorite Model will load automatically.

Using the Direct Model Select Function:

1) Turn the transmitter turned OFF.

2) Press and HOLD the SELECT switch Right or Left, or press and HOLD the BACK key while turning the transmitter ON. The

Model Programming Data associated with either of those key presses will automatically load.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 115 116

Komentáře k této Příručce

Žádné komentáře

AIRTRONICS M12 Uživatelská příručka Strana 29

Komentáře k této Příručce

Související produkty a manuály pro Dálková ovládání AIRTRONICS M12