AIRTRONICS M12 Uživatelská příručka stáhnout pdf (Strana 49)



When you choose UNIT > MPH or UNIT > KM/H the RATIO > value will be replaced with a 10COUNT DIST. > value.











2) Press the ENTER key to open the LOG SETUP menu, then scroll UP or DOWN

to highlight the RPM menu.

UNIT setting range is RPM, MPH and KM/H. The default setting is RPM.

3) Press the ENTER key to open the RPM menu. UNIT > RPM will be highlighted.

4) Press the ENTER Key, then scroll UP or DOWN to change the RPM Unit to the

desired value. When RPM is chosen, the RPM of whatever the RPM Sensor is

attached to will be displayed. When MPH or KM/H is chosen, the speed of your

Model will be displayed in either MPH or KM/H, respectively.

Changing the RPM Unit Value:

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the LOG SETUP

menu.

Changing the Maximum Scale Value:

1) From within the RPM menu, scroll UP or DOWN to highlight the MAX SCALE >

value. This value will vary depending on the UNIT > value chosen previously.

MAX SCALE setting range is 500 to 127500 RPM, 1 to 999 MPH and 1 to 999 KM/H. The default setting is 30000 RPM, 34 MPH

and 54 KM/H.

The Maximum Scale MPH and KM/H setting range will vary based on the 10Count Distance value programmed when you

calibrate the RPM Sensor. For more information, see the

Calibrating the RPM Sensor - Changing the 10Count Distance Value

section on page 50.

Calibrating the RPM Sensor - Changing the Ratio Value:

The Ratio value can be changed if you've Selected UNIT > RPM. By changing the Ratio value you are able to read actual motor or

engine RPM even though the RPM sensor may be mounted to your Model's spur gear and not to the motor's pinion gear or the

engine's flywheel.

1) From within the RPM menu and with UNIT > RPM Selected, scroll UP or

DOWN to highlight RATIO > 1.000.

2) Press the ENTER key, then scroll UP or DOWN to change the Maximum Scale value. This value determines the maximum

RPM, MPH or KM/H value that will be displayed on the TELEMETRY screen ALL and RPM pages.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 115 116

Žádné komentáře

AIRTRONICS M12 Uživatelská příručka Strana 49