AIRTRONICS M12 Uživatelská příručka stáhnout pdf (Strana 31)













Changing the Modulation Type, Continued....

4) Press the ENTER key. SET TO FH3? (or the Modulation Type you Selected)

NO/YES will be displayed. Scroll UP or DOWN to highlight YES, then press the

ENTER key.

If you want to go back and change the Modulation Type or if you don't want

to change the Modulation Type for any reason, choose NO or press the

BACK key.

IMPORTANT: Not all BIND menu functions are supported by all Modulation Types. Only supported functions will be displayed

once a Modulation Type is chosen. For example, the FH3 Modulation Type does not support Telemetry.

The following Modulation Type options are available:

FH2 - Select this Modulation Type when using Airtronics 2.4GHz FH2 surface receivers.

FH3 - Select this Modulation Type when using Airtronics 2.4GHz FH3 surface receivers.

FH3F - This Modulation Type is NOT used in North America.

FH4T (Default) - Select this Modulation Type when using Airtronics 2.4GHz FH4 or FH4T surface receivers.

FH4FT - This Modulation Type is NOT used in North America.

Changing the Safety Link Number:

The Safety Link function is used to program a unique code to each receiver/Model pair, preventing the transmitter from controlling

a Model that it's not currently programmed for. This helps prevent a runaway Model should you accidentally choose the wrong

Programming Data for the intended Model.

The Safety Link Number should be chosen prior to Binding the transmitter and receiver pair. To make it easier to keep track

of what Safety Link Number goes to what Model, we suggest making the Safety Link Number the same as the Model Number.

1) From within the BIND menu, scroll down to highlight SAFETY LINK > 01.

2) Press the ENTER key, then scroll UP or DOWN to highlight the desired Safety

Link Number.

SAFETY LINK setting range is 01 to 50. The default setting is 01.

Turning the Telemetry Function ON and OFF:

1) From within the BIND menu, scroll down to highlight TELEMETRY > ON.

2) Press the ENTER key, then scroll UP or DOWN to choose the desired Telemetry

value, either ON or OFF.

TELEMETRY setting range is ON or OFF. The default setting is OFF.

3) Press the ENTER key. SET TO LINK No.02? (or the Safety Link Number you

Selected) NO/YES will be displayed. Scroll UP or DOWN to highlight YES, then

press the ENTER key.

If you want to go back and change the Safety Link Number or if you don't

want to change the Safety Link Number for any reason, choose NO or press

the BACK key.

Changing the Servo Operating Mode:

The Servo Operating Mode function is used to optimize the radio control system to suit the type of servos you're using in your

Model. For example, using the SHR setting with Digital servos will Increase the servo's response time, even above the

manufacturer's stated specification. If you're using Airtronics SRG Digital servos, you can use the SSR setting for the fastest

response time. The combination of using Digital servos and using the correct Servo Operating Mode value results in the ultimate

feel and response, making you feel more in control of your Model than ever.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 115 116

Komentáře k této Příručce

Žádné komentáře

AIRTRONICS M12 Uživatelská příručka Strana 31

Komentáře k této Příručce

Související produkty a manuály pro Dálková ovládání AIRTRONICS M12