AIRTRONICS M12 Uživatelská příručka stáhnout pdf (Strana 38)



CLICK

TRIM

CENTER

MULTI

TIMER SW

INT1 TIMER

INT2 TIMER

LAP-PRE

LAP GOAL

OFFSET

TELEMETRY

LIMIT











Changing the Auxiliary Lever High and Low Tweak Values:

The High and Low Tweak values both determine how far and in which direction the Auxiliary Lever controls the function Assigned

to it when the Auxiliary Lever is moved Up and Down, regardless if the Auxiliary Lever is controlling a servo, such as Auxiliary

Channel 2 or a function parameter, such as Steering Trim. For example, if you Assign AUX2 to the Auxiliary Lever and adjust the

Tweak values to +50 and -50, the Auxiliary 2 servo will be centered when the Auxiliary Lever is centered and will travel 50% in one

direction when the Auxiliary Lever is moved Up and travel 50% in the other direction when the Auxiliary Lever is moved Down.

Alternately, if you Assign TRIM

ST to the Auxiliary Lever and adjust the Tweak values to +50 and -50, the Auxiliary Lever will control

Steering Trim from 0% to 50%.

1) From within the LEVER menu, scroll UP or DOWN to highlight LEVER [TWEAK

(H)] > +100.

2) Press the ENTER key, then scroll UP or DOWN to choose the desired High

Side Tweak value. Increasing the Tweak value will Increase travel in the

High Side direction and Decreasing the Tweak value will Decrease travel in

the High Side direction. Using a Negative value will change the direction of travel.

TWEAK (H) setting range is -100 to +100. The default setting is +100.

3) Scroll DOWN to highlight LEVER [TWEAK (L)] > -100.

4) Press the ENTER key, then scroll UP or DOWN to choose the desired Low Side

Tweak value. Decreasing the Tweak value will Increase travel in the Low

Side direction and Increasing the Tweak value will Decrease travel in the

Low Side direction. Using a Positive value will change the direction of travel.

TWEAK (L) setting range is -100 to +100. The default setting is -100.











The Buzzer function allows you to change the Tone and Volume of many of the audible sounds that the transmitter makes. This

ranges from sounds that are made when you press Trim and Push-Button Switches, scroll UP or DOWN or press the ENTER key,

Lap and Interval Timer alarms, Telemetry alarms, transmitter Voltage Limit alarm and more.

The Volume can be Increased or Decreased (or Muted) and the Tones can be changed to suit your preference. In addition, many

of the Tones can be set separately for the first half and the second half of a Tone, making it easier to differentiate between the

two halves.

DESCRIPTION

Controls Key Press Tones, Such as ENTER, BACK, SELECT and All Push-Button Switches

Controls All Trim Switch Key Press Tones

Controls the Trim Switch, Auxiliary Dial and Auxiliary Lever Neutral Point Indicator Tones

Controls the Push-Button Rotary Dial scroll UP and Scroll DOWN Tones*

Controls the Lap Timer Start and Stop Tones*

Controls the First Interval Timer Start and Stop Tones

Controls the Second Interval Timer Start and Stop Tones

Controls the Lap Timer Pre-Alarm Tone

Controls the Lap Timer Goal Alarm Tone

Controls the Offset Function Alarm Tone

Controls the Various Telemetry System Alarms*

Controls the Transmitter Limit Voltage Alarm*

**Only TONE1 (first half) changes affected. No affect on TONE2 (second half) changes.

FUNCTION

The following is a list of the functions that the Tone and Volume can be adjusted for:

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 115 116

Komentáře k této Příručce

Žádné komentáře

AIRTRONICS M12 Uživatelská příručka Strana 38

Komentáře k této Příručce

Související produkty a manuály pro Dálková ovládání AIRTRONICS M12