AIRTRONICS M12 Uživatelská příručka stáhnout pdf (Strana 40)













Turning Vibration Functions ON and OFF:

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the VIBRATOR

menu.

2) Press the ENTER key to open the VIBRATOR menu. POWER > OFF will be

highlighted.

3) Scroll UP or DOWN to highlight the function you would like to change the

Vibration value for.

DESCRIPTION

Vibrates When the Transmitter is Turned ON

Vibrates to Indicate When the Transmitter Reaches the Programmed Voltage Alert Value

Vibrates to Indicate Telemetry System Alarms

Vibrates to Indicate When the First Interval Timer Starts and Stops

Vibrates to Indicate When the Second Interval Timer Starts and Stops

Vibrates to Indicate When the Lap Timer Pre-Alarm Time is Reached

Vibrates to Indicate When the Lap Timer Goal Time is Reached

POWER

BATTERY

TELEMETRY

INT1 TIMER

INT2 TIMER

LAP-PRE

LAP GOAL

FUNCTION

The following is a list Vibration Functions that can be turned ON or OFF:











The LCD menu allows you change the contrast of the LCD, the brightness of the LCD Backlight, the Backlight Mode and the

Backlight On-Time. Changing the Contrast and Brightness settings can make it easier to view the LCD in different lighting

conditions and changing the Backlight Mode and Backlight On-Time affects how the Backlight is turned ON and how long the

Backlight stays ON.

Changing the LCD Contrast:

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the LCD

menu.

IMPORTANT: Increasing the brightness of the LCD Backlight and/or leaving the LCD Backlight ON at all times will Increase

battery consumption. In addition, Decreasing the Contrast value near the Lower limit can result in the LCD text becoming

difficult to read. Be careful not to set the Contrast value too low.

4) Press the ENTER key, then scroll UP or DOWN to choose the desired Vibration

value, either ON or OFF.

VIBRATOR setting range is OFF to ON. The default setting for all functions is OFF.

5) Press the ENTER key, repeat steps 3 and 4 to change the Vibration value for any

other desired functions.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 115 116

Komentáře k této Příručce

Žádné komentáře

AIRTRONICS M12 Uživatelská příručka Strana 40

Komentáře k této Příručce

Související produkty a manuály pro Dálková ovládání AIRTRONICS M12