
68
Choosing the Four Wheel Steering Mixing Options, Continued....
2) Press the ENTER key to open the 4WS MIX menu. The last Four Wheel Steering
Mixing option Selected will be highlighted.
3) Press the ENTER key, then scroll UP or DOWN to highlight the Four Wheel
Steering Mixing option you would like to use.
4) Press the ENTER key to Activate that option.
Use the Servo Monitor at the bottom of the 4WS MIXING screen to view
Steering channel output.
The following Four Wheel Steering Mixing options are available:
REAR Wheel Steering - When Active, only the Rear Steering will operate.
NORMAL (Parallel/Crab) Four Wheel Steering - When Active, both the
Front and Rear Steering will operate in Parallel.
REVERSE (Tandem) Four Wheel Steering - When Active, both the
Front and Rear Steering will operate in Tandem.
FRONT Wheel Steering - When Active, only the Front Steering will
operate.
If the Steering servos do not operate as described above, you can use the Servo Reversing function to change the direction
that each servo operates. For more information, see the
REV Menu
section on page 64.
Controlling the Four Wheel Steering Mixing Function:
1) In order to control the Four Wheel Steering function, the 4WS MIX function must be Assigned to either one of the five Trim
Switches or the Auxiliary Dial. For more information, see the
ASSIGN Menu
section on pages 33 ~ 38.
2) Use the Trim Switch or Auxiliary Dial to cycle through the various Four Wheel Steering Mixing options. A pop-up window will
display the currently Active option.
The Step value for the Trim Switch or Auxiliary Dial should be set to 1, otherwise the transmitter won't cycle properly through
the Four Wheel Steering Mixing options. For more information, see the
Changing the Trim Switch Step Value
section on
page 35 or the
Changing the Auxiliary Dial Step Value
section on pages 36 ~ 37.
Komentáře k této Příručce