AIRTRONICS M12 Uživatelská příručka stáhnout pdf (Strana 37)













Changing the Auxiliary Dial Step Value, Continued:

1) From within the DIAL menu, scroll UP or DOWN to highlight DIAL [STEP] > 5.

2) Press the ENTER key, then scroll UP or DOWN to choose the desired Auxiliary

Dial Step value.

STEP setting range is 1 to 100. The default setting is 5. The Step value is a percentage of travel.

Changing the Auxiliary Dial Direction of Travel:

The direction that the Auxiliary Dial moves the servo or function value can be changed from Normal to Reverse. In Normal mode, the

Auxiliary Dial will move the servo toward the High Side or Increase a function value when the Auxiliary Dial is turned clockwise. In

Reverse mode, the Auxiliary Dial will move the servo toward the Low Side or Decrease a function value when the Auxiliary Dial is

turned counter-clockwise.

1) From within the DIAL menu, scroll UP or DOWN to highlight DIAL [REV] > NOR.

2) Press the ENTER key, then scroll UP or DOWN to choose the desired Auxiliary

Dial Reverse value.

REV setting range is NOR and REV. The default setting is NOR.



The Lever Assignments function allows you to Assign various functions to the Auxiliary Lever. This allows you to use the Auxiliary

Lever to control those functions while you're driving. The Auxiliary Lever can control either of the two Auxiliary channels or it can

control a function, such as Steering Dual Rate or Steering Exponential.

Changing the High and Low Tweak values determines the amount of travel and direction.

Changing the Auxiliary Lever Function Assignment:

1) From within the SYSTEM menu, scroll UP or DOWN to highlight the ASSIGN

menu.

2) Press the ENTER key to open the ASSIGN menu, then scroll UP or DOWN to

highlight the LEVER menu.

3) Press the ENTER key to open the LEVER menu. LEVER [FUNCTION] > AUX2 will

be highlighted.

4) Press the ENTER key, then scroll UP or DOWN to choose the desired function

you want to Assign to the Auxiliary Lever. A complete list of functions that can be

Assigned to the Auxiliary Lever are shown in the tables on page 100.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 115 116

Žádné komentáře

AIRTRONICS M12 Uživatelská příručka Strana 37