AIRTRONICS M12 Uživatelská příručka stáhnout pdf (Strana 93)



The Code Auxiliary function is used with future connected products, such as an ESC, whose Programming Parameters can be

changed directly via the transmitter. For example, you might be able to change the connected ESC's Driving Modes directly using

the Auxiliary Dial to suit different conditions while you're driving.

Code Auxiliary Programming Values can be changed while you're driving by Assigning these functions to a Trim Switch, the

Auxiliary Dial or the Auxiliary Lever. For more information, see the

ASSIGN Menu

section on pages 33 ~ 38.

Changing the Racing Mode Delay Percentage Values, Continued....

2) Press the ENTER key to open the R-DLY menu. CH1 > 0% will be highlighted.

CH1, CH2, CH3 and CH4 setting range is 0% to 100%. The default setting for all channels is 0%.











5) Press the ENTER key, then repeat steps 3 and 4 to change any other desired Racing Mode Delay percentage values.











Changing the Code Auxiliary Values:

1) From within the RACING menu, scroll UP or DOWN to highlight either the

CODEAX1 or the CODEAX2 menu depending on which Code Auxiliary function

you want to program. In this section, we show programming Code Auxiliary 1.

2) Press the ENTER key to open the CODEAX1 menu. CODE1 > 0 will be

highlighted.

3) Scroll UP or DOWN to highlight the desired Code Auxiliary value you would

like to change.

4) Press the ENTER key, then scroll UP or DOWN to choose the desired Code

Auxiliary value.

CODE1, CODE2, CODE3, CODE4 and CODE5 setting range is -100 to 100. The default setting for all Code Auxiliary functions

is 0 (OFF).

5) Press the ENTER key again, then repeat steps 3 and 4 to change any other desired Code Auxiliary values.

3) Scroll UP or DOWN to highlight the desired channel you want to change the

Racing Mode Delay percentage value for.

4) Press the ENTER key, then scroll UP or DOWN to choose the desired Racing

Mode Delay Percentage value. Increasing the Racing Mode Delay Percentage

value will Increase the Delay when switching between Racing Modes.

The Racing Mode Delay function changes the speed of the servos as they move to their new positions when you switch

between Racing Modes. The Higher the Racing Mode Delay percentage value, the Slower the servos will transition to their

new positions when you switch Racing Modes, but the smoother the transition will be. You will need to experiment with different

percentage values to find a happy medium of smooth, yet quick transition. When the Racing Mode Delay Percentage value is set

to 0%, there will be no Delay and the transition between Racing Modes will be immediate.

This section covers both the Code Auxiliary 1 and Code Auxiliary 2 menus, since programming each of them is exactly the

same. Choose either the CODEAX1 or the CODEAX2 menu depending on which of the two Code Auxiliary functions you

want to program.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 115 116

Komentáře k této Příručce

Žádné komentáře

AIRTRONICS M12 Uživatelská příručka Strana 93

Komentáře k této Příručce

Související produkty a manuály pro Dálková ovládání AIRTRONICS M12